Modification of or tampering with the product, including but not limited to any Open Source Software, is solely at Your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will not support any product in which You have or have attempted to modify the software or hardware supplied by Western Digital.

U-boot Build Instructions:

Prepare build environment
------------------------------------------------------
- download and install toolchain:
	The toolchain used from Embedded Linux Development Kit (ELDK) version 4.2 for ppc_4xxFP, available at http://www.denx.de/wiki/DULG/ELDK.
	The specific toolchain can be found in the iso available at http://ftp.denx.de/pub/eldk/4.2/ppc-linux-x86/iso/ppc-2008-04-01_amcc.iso.
- export PATH=</path/to/toolchain>/bin:$PATH
- export CROSS_COMPILE=ppc_4xxFP-
- export ARCH=ppc
- mkdir BUILD_OUT


Build u-boot
------------------------------------------------------
- make distclean
- make apollo3g_config
- make
- cp u-boot.bin BUILD_OUT/


Install Barebox
------------------------------------------------------
The image u-boot.bin can only be written to the SPI Flash memory using an appropriate JTAG programmer. 
Modification of or tampering with the product, including but not limited to any Open Source Software, is solely at Your own risk. Western Digital is not responsible for any such modification or tampering. Western Digital will not support any product in which You have or have attempted to modify the software or hardware supplied by Western Digital.
